Tip of the Day: When ordering appliances, carefully check the specs
Carpenters live by the adage, Measure twice. Cut once. The same advice can apply to ordering appliances and equipment for a kitchen remodel, says one New Jersey homeowner who recently undertook a top-to-bottom makeover of the 300-square-foot kitchen at her 1960s Cape Cod house.
Because Helaine W.’s new kitchen includes a bank of windows on the exterior wall, the plans called for an island vent hood—a wall-mounted hood with through-the-wall venting wouldn’t fit the design. What’s more, the hood had to be 24 inches deep or less so it wouldn’t overhang the counter.
To find the right-size hood, Helaine, her kitchen designer, and a salesperson from a local appliance store searched the Web sites of several major manufacturers and found the Franke FDF 367 1XS 36-inch-wide island hood. The Franke site indicated a depth of a little more than 19 inches, ideal for the application. An order was placed for the unit.
When the hood arrived four weeks later, the contractor notified Helaine that the Franke [...]
(click here to continue reading ››)
This REALLY spoke to me because I have thought about this issue a LOT. The issue is if one should substitute refrigerator drawers in place of a traditional tall refrigerator in a small kitchen.